- Wed Dec 17, 2008 7:21 pm
#84245
- Wed Dec 17, 2008 8:25 pm
#84256
- Thu Dec 18, 2008 2:51 am
#84337
92 civic cx sold!!
horizon gray 94 LX-A wrecked :/
white 92 civic Si (traded)
primered 94 teg sold
92 civic DX sold!!
93 red EX coupe parted out!
93 LS400 Midnight indigo sold!
92 civic LX sold!!
90 240sx sold!
93 faded black EX coupe
horizon gray 94 LX-A wrecked :/
white 92 civic Si (traded)
primered 94 teg sold
92 civic DX sold!!
93 red EX coupe parted out!
93 LS400 Midnight indigo sold!
92 civic LX sold!!
90 240sx sold!
93 faded black EX coupe
- Thu Dec 18, 2008 3:03 am
#84345
- Thu Dec 18, 2008 5:22 am
#84369
it looks like the stock bumper, with the EK side openings molded in.
1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300
- Thu Dec 18, 2008 9:14 am
#84380
to answer a few Q's, the rear lip is a modified EP3 Type R one (lot of work 
), the skirts are of unknown origin, they were on my JDM EG6 when it was imported, and the front bumper is one we made using an EG and facelift EK bumper 
lot of hours in it but i like it, I think the white crow one looks out of proportion.
heres a bit of spec on it...
EG5 ESI
-Body
-All traces of rust chased and cut out, new panels fitted ; rear inner and outer quarters, rear inner arches, sills, doors, wings, front panel, bonnet, tailgate. yeh, just about all of it.
-Carbon fibre sunroof filler
-Custom front and rear bumpers, spoon sports front lip, sideskirts
-granada black respray
-chassis
-Cusco rollcage
-Powerflex poly bushes
-ITR ARB's
-A pillar braces
-Tanabe underbraces
-Spoon sports upper rear brace
-Koni coilovers
-Performancetek 300mm front brake conversion
-Performancetek 260mm rear brake conversion
-Performancetek braided brake lines (neon blue)
-EK9 servo and master cylinder
-Engine
-K24A3 block (UK spec), stock internals
-K20A2 Type R head/cams/inlet
-DC sports header
-2.5" custom exhaust
-Kpro
-Hasport mounts
-Performancetek shafts
-Performancetek clutch line
-Performancetek loom
-DC5 gear linkages/carcepts kit
-10.5:1 CR
-245bhp / 198lb/ft
-interior
-Accord Type R recaros
-EG6 rear seats/trim panels
-DC5 gearknob
-EP3 Type R instrument cluster (WIP)
-DC5 type R OEM blue mats
-Gathers rear speakers
), the skirts are of unknown origin, they were on my JDM EG6 when it was imported, and the front bumper is one we made using an EG and facelift EK bumper lot of hours in it but i like it, I think the white crow one looks out of proportion.
heres a bit of spec on it...
EG5 ESI
-Body
-All traces of rust chased and cut out, new panels fitted ; rear inner and outer quarters, rear inner arches, sills, doors, wings, front panel, bonnet, tailgate. yeh, just about all of it.
-Carbon fibre sunroof filler
-Custom front and rear bumpers, spoon sports front lip, sideskirts
-granada black respray
-chassis
-Cusco rollcage
-Powerflex poly bushes
-ITR ARB's
-A pillar braces
-Tanabe underbraces
-Spoon sports upper rear brace
-Koni coilovers
-Performancetek 300mm front brake conversion
-Performancetek 260mm rear brake conversion
-Performancetek braided brake lines (neon blue)
-EK9 servo and master cylinder
-Engine
-K24A3 block (UK spec), stock internals
-K20A2 Type R head/cams/inlet
-DC sports header
-2.5" custom exhaust
-Kpro
-Hasport mounts
-Performancetek shafts
-Performancetek clutch line
-Performancetek loom
-DC5 gear linkages/carcepts kit
-10.5:1 CR
-245bhp / 198lb/ft
-interior
-Accord Type R recaros
-EG6 rear seats/trim panels
-DC5 gearknob
-EP3 Type R instrument cluster (WIP)
-DC5 type R OEM blue mats
-Gathers rear speakers
- Thu Dec 18, 2008 12:15 pm
#84386
- Thu Dec 18, 2008 12:31 pm
#84389
- Thu Dec 18, 2008 12:44 pm
#84392
- Thu Dec 18, 2008 1:58 pm
#84401
- Thu Dec 18, 2008 5:48 pm
#84426
- Page 2 of 3
- 1
- ,
- 2
- ,
- 3