- Thu Jan 21, 2010 2:37 am
#169890
so my climate control fan only works on speeds 3 and 4...does this mean the motor is blown or could it be something else?
Take out the glove box and behind it on the heater control piping is off colored plastic peice with a wire plug going into, It will be facing up towards to top of the dash. Un-hook the plug and remove the screws to take it out. You will see some of the wires are all messed up. Replace it with one from the junkyard. I did this When I was replacing some trim that required me to remove my dash. That might be necessary to replace it, at least make it alot easier.
Good luck.
