Civic-EG.com Forum 3.3.1

- Thu Aug 13, 2009 8:52 am #137645 hey all i found some wheels for a good price.

enkei apacheV's 14x6 +18 can i use this wheels on my eg with out any problems??

- Thu Aug 13, 2009 12:10 pm #137648 What eg do you have... ex/cx/dx/si/lx etc... and Are the wheels 4x100? or 4x114.3? most of them ive seen are 4x114.3..

- Thu Aug 13, 2009 12:37 pm #137651 Man those are Sick!! Me like me like!!
If those are 4x100 get em!!!!!!!

[teal_dx]

- Thu Aug 13, 2009 12:38 pm #137652

hey all i found some wheels for a good price.

enkei apacheV's 14x6 +18 can i use this wheels on my eg with out any problems??

depends on ride height, tire size, camber, spring rate...

You should be okay unless any of the above are too extreme. Worst case you may have to roll the inner fender lip.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Thu Aug 13, 2009 12:44 pm #137653 I almost got some that were the same style this past weekend for a Flippin good deal but they were 4x114....Also Teal is right thats a very low offset...But if u can pull it off then SICKNESS!!

(Here are the ones I was gonna get)

- Thu Aug 13, 2009 1:25 pm #137655 I really dont think there will be any issues unless its the wrong lug pattern. Plus they are sick wheels.

- Thu Aug 13, 2009 3:51 pm #137698 alright thanks i got a dx

- Thu Aug 13, 2009 4:05 pm #137704 those are 4x114.3 pattern. 4x100 has the holes closer together.


the wheel would also stick out 27mm more than a 15x6 +45 wheel would. I really need to find out the stock specs on our steelies...

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

- Thu Aug 13, 2009 5:37 pm #137725 yeah my bolt pattern rightnow is 4x100

i was going to get a adapter for them going from 4x100 to 4x114.3

that would work right?

im only doing this cuz im getting the wheels for a good price.

- Thu Aug 13, 2009 5:41 pm #137726 Get'em then! throw them on and if for some reason you cant get them to work (which I think you'll be ok) then you can re-sell them and make a profit

- Thu Aug 13, 2009 5:46 pm #137735 yeah same thing i was thinking hahaha
thanks for the help

one more thing were can i get some good adapters online?

- Fri Aug 14, 2009 3:07 am #137838 just got back from a 45min drive to get my wheels

got them for $120

[teal_dx]

- Fri Aug 14, 2009 3:27 am #137842 some of those adapters are kinda thick which will be adding more negative offset to the wheel. You didn't mention adapters before... you may have a fitment problem with these on your car + adapters...

nice buy though

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Fri Aug 14, 2009 4:07 am #137844 haha yeah did up ^ there
mm i seen it done b4 but u might b right =/
only one way to find out or mayb i can trade them...?
how much can i sale them for..? there in pretty good condition =]

- Fri Aug 14, 2009 6:51 am #137849 SICK!!