ECU, Wiring, Sensors
By n17_dub
#103131 Hello all, i'm from the uk. recently i wrote of my car :( and decided to do an engine conversion from a saloon into a hatchback, the engine before was from a VTI and has gone into a LSI so all the loom has had to come out and go into the hatchback. My problem is now that that Radio no longer works and when I turn of the engine and pull out the key the heater still works and all the lights are still on the heater. I have to turn the fan of myself but before I could pull out the key and it would stop. Any thoughts to this? thank you very much and sorry for it being for long
User avatar
By i8umup
#103138 you might want to recheck all ur conections something similar happened to me. i by accident hooked up the 4 way flasher wire to my clock and my clock to my 4 ways .what happened was my car would start with the key but when i turned the key off and pulled it out the engine would still run and i could drive it arround :D........so i suggest doubble check all of ur connections and make sure what u have it pluged into is what it goes to.