Civic EG

by **rustyrex** » Wed May 13, 2015 1:30 pm

I am replacing my quarter panels and doing a full color change in June. I am missing my drivers side windshield moulding and the other two pieces are bent and I want the remove the quarter glass for the respray. Does anyone know where I can find new windshield moulding and new quarter glass seals. I don't really care about the price. I have been looking for three yearsand pushing off doing this bodywork for just as long because k can't find these pieces. Please some one help me restore my hatchback lol.

by **Driv-it-hard** » Wed May 13, 2015 3:20 pm

rustyrex wrote:I am replacing my quarter panels and doing a full color change in June. I am missing my drivers side windshield moulding and the other two pieces are bent and I want the remove the quarter glass for the respray. Does anyone know where I can find new windshield moulding and new quarter glass seals. I don't really care about the price. I have been looking for three yearsand pushing off doing this bodywork for just as long because k can't find these pieces. Please some one help me restore my hatchback lol.

I have used this website for all those hard parts.

http://www.hondaautomotiveparts.com/

by **HeikDiesel** » Wed May 13, 2015 10:16 pm

Really? Takes 2 seconds to look those items up. Also on the rear QP glass molding, you have to removed the glass to install the molding and then re-glue the window back in.

by **teal_dx** » Thu May 14, 2015 1:27 am

HeikDiesel wrote:Really? Takes 2 seconds to look those items up. Also on the rear QP glass molding, you have to removed the glass to install the molding and then re-glue the window back in.

I removed the rear 1/4 glass mounding without pulling the glass out. I took patience to get it back in. I used a skinny plastic scraper and pushed it back in on a hot day. It was easier when the warm weather made the rubber more flexible.
You might try galling some local auto glass shops as well.

by **HeikDiesel** » Thu May 14, 2015 3:47 pm

teal_dx wrote:
HeikDiesel wrote:Really? Takes 2 seconds to look those items up. Also on the rear QP glass molding, you have to removed the glass to install the molding and then re-glue the window back in.

I removed the rear 1/4 glass mounding without pulling the glass out. I took patience to get it back in. I used a skinny plastic scraper and pushed it back in on a hot day. It was easier when the warm weather made the rubber more flexible.
You might try galling some local auto glass shops as well.

Really? I wasn't able to do that. I tried and tried and finally just had a glass guy come out and piano wire the glass out and glue them back in. Only charged me $50 to R&I them.

by **Virux** » Fri May 15, 2015 1:17 am

http://www.48parts.com/parts/honda-us/1 ... windshield
You can click on the ID numbers in the diagram to highlight the part number below. Google the part numbers and you should be able to find a handful of sites selling them? I'm not sure if you can buy the windshield mouldings separately.

If I hit the lottery, I'm gonna' get all new trim, mouldings and clips. and then I can be happily bankrupt :lol:

by **big.turbo.daddy** » Sun Jun 28, 2015 8:26 pm

Have you gone to a honda dealership might be a bit pricey though, they usually can get you any stock part

by **rustyrex** » Tue Jun 30, 2015 11:50 pm

Yea I tried 7-8 different ones. None of them have what I need or can even order them.

by **HeikDiesel** » Sun Jul 05, 2015 12:15 am

Rusty I'll look up the part numbers for you if you're really having that hard of a time.

by **rustyrex** » Sun Jul 05, 2015 8:45 pm

I have the part numbers. I need the actual parts lol

by **HeikDiesel** » Mon Jul 20, 2015 6:48 pm

sooooo order them?

by **rustyrex** » Mon Jul 20, 2015 6:50 pm

No dealer around me can get them

by **HeikDiesel** » Mon Jul 20, 2015 6:51 pm

Post what you're looking for specifically

by **rustyrex** » Mon Jul 20, 2015 6:55 pm

The three trim pieces around the windshield and the seals for both rear Windows for a 95 hatchback. I can post actual parts numbers after work

by **EconoBox** » Mon Jul 20, 2015 7:13 pm

Windshield molding and clips:
73152-SR3-003
MOLDING ASSY., R. FR. WINDSHIELD SIDE
LIST: $89.03

73151-SR3-013
MOLDING, FR. WINDSHIELD (UPPER)
LIST: $29.73

73162-SR3-003
MODLING ASSY., L. FR. WINDSHIELD SIDE
LIST: $89.03

91511-SR3-003 (NEED 8 )
CLIP D, FR. WINDSHIELD SIDE MOLDING (ORANGE)
LIST: $3.70 EACH

Quarter glass seals:
73860-SR3-000
MOLDING, L. QUARTER
LIST: $63.98

73810-SR3-000
MOLDING, R. QUARTER
LIST: $63.98

PM Me and we can discuss discounted price and shipping I can have all of these pieces to my dealership here in Florida on Wednesday and shipped to you the same day. I can put you in touch with our online sales, create an eBay listing, or just do an order through email. Shipping to Ohio would take 3-4 days ground and I'd have to get a quote based on packaging size but we don't mark up our shipping whatever FedEx charges us would be your price.

Civic EG

windshield mouldng and quarter glass seals

windshield mouldng and quarter glass seals

Re: windshield mouldng and quarter glass seals

Who is online