- Thu Mar 29, 2012 6:00 pm
#300304
- Sat Mar 31, 2012 3:22 am
#300449
- Sat Mar 31, 2012 5:36 pm
#300487
here are the pics of the lca's installed, eventually i will take them back off and power coat them red. also the gsr cluster.
- Mon Apr 02, 2012 7:25 pm
#300676
well yesterday i was messing with the car, checked all my belts, they looked all cracked up and shitty so I went ahead and replaced them. while doing so i noticed my timing belt was really loose. I went ahead and tightened that as well. I also filled my drivers side torque mount because it was super loose and one piece was broken. the car feels smoother, and seems to be picking up better. there was a ton of slack in the timing belt so maybe that did it.
next upgrades will most likely be rear and front camber kit.
next upgrades will most likely be rear and front camber kit.
- Thu Apr 12, 2012 8:00 pm
#301634
not the prettiest but it definitely stiffened up a good bit. ill put it in tomorrow and see how i like it. pass side is next 
- Fri Apr 13, 2012 9:20 pm
#301755
- Sat Apr 14, 2012 6:45 pm
#301873
- Sat Apr 14, 2012 7:33 pm
#301882
ahhh....i'll gotta start up my junkyard search again then.
- Mon Apr 16, 2012 5:14 am
#301988
- Tue Apr 17, 2012 1:28 am
#302074
finally got to chipping my p06 ecu. it was pretty easy once i got using the solder sucker and the soldering iron at the same time.
