1995 VX from Idaho - Headlights, Nitrogen filled tires...

Post YOUR Hatchback here
 Reply
User avatar

I need everyone's opinion on new headlights!!

By murphidaho
- Thu May 19, 2011 4:45 pm #255916 Ok so I think it might be time for a change...

The image below shows the current headlights on the car. I think they help give the car an updated look and they fit nicely, but I can't help but notice how cheap they are. It's just not true to the car. So....

I need suggestions on new lights.

These are my thoughts so far but feel free to suggest alternatives:

1) USDM Stanley (already have them in the garage) + Amber Vision Corners + HID kit
2) USDM Stanley + JDM Stanley Corners + HID kit
3) JDM Stanley headlights and corners + HID kit
4) EDM headlights???? The glass ones without the nipples? think I could find some??


Here are my concerns:
1) Fitment: Are the JDM Stanleys going to look right with USDM glass w/ nipples??
2) If I buy JDM Stanleys (headlights and corners) is the plastic gonna be scratched and worn? think eBay. or another source?
3) Ideas on what HID kit??

Thanks everyone! your awesome!!

Image[/b]
User avatar

By dbrooks
- Wed Jun 15, 2011 12:15 am #259496
User avatar

By dbrooks
- Wed Jun 15, 2011 5:43 am #259524
User avatar

By robster
- Wed Jun 15, 2011 6:59 am #259531 My opinion is to lett the moldings away .... i was more than happy getting a EG witout the holes in the body for the klips :wink:
User avatar

Updates 9/18/11 Headlights, Sub Box, VX wheels

By murphidaho
- Sun Sep 18, 2011 4:59 pm #272620 I finally got around to updating the site. Since last time I have successfully installed some new headlights as well as a couple other things. Kinda just fiddling around to see what I like.

I also repainted all of my black exterior pieces. Things were starting to look a little dulled. Mirrors and trim look like new now though!

New JDM Headlights - Much cleaner looking
Image


I designed a new sealed subwoofer enclosure. This is number 3 for the car. The last one was just taking up too much space for the back to be usable. I also like the sealed sound better as well.
Image

Amp mounted in the spare tire
Image

All installed before carpeting
Image

The finished product... clean looks and clean sound. The cross tie does a nice job of protecting it too if I ever load stuff in the back.
Image


On an unrelated topic. I decided to put my old VX wheels back into use. I wrapped them in some new 165/75/R13 low rolling resistance Sumitomos, the factory tire size.

The tires have also been filled with Nitrogen. I have been hearing good things about Nitrogen filled tires. They don't heat up on the highway, and because of the larger molecules, Nitrogen doesn't osmosis through the rubber like air does. It also is supposed to help with fuel economy (which it does!)
Image

I recently was driving through California on the I-5 headed South. For 165 miles going 76mph I averaged 60MPG!!! That's better than a PRUIS! I was stoked! I still have my Proxies with SI wheels, but I swap these babies on when its time for a road trip.
Image

I've got a couple more projects to post on soon...
User avatar

By eg-guy
- Mon Sep 19, 2011 8:35 pm #272895 very clean n simple, that custom sub enclosure looks pretty good to.

i wish i could get 60mpg
User avatar

By Fada Blayne
- Tue Sep 20, 2011 12:12 am #272954
 Reply
Return to Your Ride - Hatchback