- Fri May 14, 2010 9:14 pm
#194300
Got my MOT today. No problems
Full progress:
http://www.raceminded.com/forum/viewtopic.php?f=7&t=749
Sneak:
B is overrated
Full progress:
http://www.raceminded.com/forum/viewtopic.php?f=7&t=749
Sneak:
B is overrated
- Fri May 21, 2010 6:18 pm
#195963
^^ no custom but seibon can maek them out of kevlar for instance. I don't know where these came from.
Due to 2 accidents involving my daily Ford Focus and my girls del sol I had no time to spend on the civic. I'm well but my daily is totaled and the del sol has a dent worth $800 repair costs.....
Nevertheless:
This stuff is used to make the mold come loose after the mold is hardend. Just wax in wax out like you would do to make the car shine:
Stuff I need:
-resis
-harderener
-latex gloves
-poly fabric
-cups
-etc
Just mix some hardener and resin en "paint" the part. Put some fabric and "paint" again
Put some plastic over it and tape it firm
[
Wait for it:
2nd part
Just to show you these doors aren't plug and play:
This is the OEM door with all sorts of ledges to put the rubbers in. My doors don't have any ledges so I did this:
I used the OEM clips in the OEM doors.
Also had to cut some parts of the rubber to make it fit:
The outer doorrubbers need to be glued.
B is overrated
Due to 2 accidents involving my daily Ford Focus and my girls del sol I had no time to spend on the civic. I'm well but my daily is totaled and the del sol has a dent worth $800 repair costs.....
Nevertheless:
This stuff is used to make the mold come loose after the mold is hardend. Just wax in wax out like you would do to make the car shine:
Stuff I need:
-resis
-harderener
-latex gloves
-poly fabric
-cups
-etc
Just mix some hardener and resin en "paint" the part. Put some fabric and "paint" again
Put some plastic over it and tape it firm
[
Wait for it:
2nd part
Just to show you these doors aren't plug and play:
This is the OEM door with all sorts of ledges to put the rubbers in. My doors don't have any ledges so I did this:
I used the OEM clips in the OEM doors.
Also had to cut some parts of the rubber to make it fit:
The outer doorrubbers need to be glued.
B is overrated
- Sat May 22, 2010 5:47 am
#196111
x2