Dash Seats, Steering Wheels etc... If it's inside your Civic then it's in here.
User avatar
By momoyouknow
#172053 so i just got done w/ my dash swap and i wanna swap out my steering wheel but the screw for the air bag is still stripped. is there any way to remove the darn thing w/out takin out the airbag?
User avatar
By DontHateonEG8
#172066 no, because the airbag covers the main locknut to take the steering wheel off. i would advise going to home depot or alternative hardware place and to get advise onto removing that stripped pecker.

good luck!
User avatar
By asianrob
#172167 i ran into this problem once. i had to drill the fucker out. if you plan on reusing the steering wheel with airbag. id replace those star bolts with 10mm.
User avatar
By momoyouknow
#172181 honestly i've tried to drill this sucker out with a dremel and power drill.. it's like some kinda omega screw!! :lol:
By imtyson
#173164 so i heard that if you have a detachable steering wheel you wont be able to get your car deq'ed as well is that true?
By imtyson
#173165 so i heard that if you have a detachable steering wheel you wont be able to get your car deq'ed as well is that true?
By deschlong
#173175
momoyouknow wrote:honestly i've tried to drill this sucker out with a dremel and power drill.. it's like some kinda omega screw!! :lol:


I feel your pain. Thankfully, my Civic never had airbags (Canadian) ... but I have had this problem at the junkyard ... but at least there I can be a little less "civil" on the steering wheel. :)

I suggest getting a screw extractor instead of just trying to drill it out... should work infinitely better.
User avatar
By dro21
#173379
deschlong wrote:
momoyouknow wrote:honestly i've tried to drill this sucker out with a dremel and power drill.. it's like some kinda omega screw!! :lol:


I feel your pain. Thankfully, my Civic never had airbags (Canadian) ... but I have had this problem at the junkyard ... but at least there I can be a little less "civil" on the steering wheel. :)

I suggest getting a screw extractor instead of just trying to drill it out... should work infinitely better.

The grabit is your what u need
take a look http://www.asseenontvguys.com/index.asp ... ProdID=380
User avatar
By marquisdee1018
#173456 Craftsman makes a set like that but it isn't double sided. Works like a charm.