Post YOUR Sedan here
User avatar
By Digs
#165329 hey all

Heres my ride at the moment, taken the photos with my cell phone while its raining and im bored, click on pic for a larger version if you wish.

refurbed head:
Image

gearbox:
Image

block(going to the engineers on monday):
Image

New pistons, gaskets, rubbers, cam belt, water pump and piston rings:
Image

and then the car:
Image
Image

front is up as the engines not in and the carb, tappet cover, branch and other bits are in the boot

and noooo whats this peeling on my roof? clear coat coming off? ahh help! and its not the rain or anything, it was there when it wasnt raining before
Image
Last edited by Digs on Wed Apr 07, 2010 7:05 am, edited 1 time in total.
User avatar
By 3kkl3sia
#165341
Digs wrote:and noooo whats this peeling on my roof? clear coat coming off? ahh help! and its not the rain or anything, it was there when it wasnt raining before
Image


Back when they painted our cars, the technology of the clear coat was no where near where it is now. There was not UV protection like we have now. I have heard of some way to strip the clear off and just re-clear coating the car but i dont know if its actually possible.
User avatar
By Digs
#165451 im not goin anywhere fancy with the motor yet as i just want it running asap, you see the engines in pieces as the previous owner drove the car with the water pump broke and the engine over heated, but luckily it wasnt too damaged so the block is a lil damaged so we're boring the block to a 1600 and i got the 1600 pistons like 5 days ago, once its all running smoothly on the road i might add a cold air intake and exhaust maybe we'll see whats up later! :) but im definately changed those stupid rims
User avatar
By chrono404
#165455 looks like a good start on a build, I was looking at your pic and saw ballade, and thought "Ah! South africa" then looked at your location tag.

Looking forward to seeing what you do with this. :thumb:

I am Jealous of your rear antenna. My sedan has it on the roof, Having it in the rear like yours makes it look more classy.
User avatar
By josephsantos
#165486 My sedan was also Harvard Blue before I repainted it. Nice sedan! :thumb:
User avatar
By Digs
#165652 sent the block and pistons to the engineer today so hopefully it'll come back soon soon so me and my dad can build it and put it in!!!! saw a white eg sedan today with black 17" racing harts on, looked sick and had lots of clearance but had super low profile tyres, making me think to go the 17" route when told not to hmmmm
By thirdson
#165882 Get lower and go 15s or 16s..hehe
By thirdson
#165885
Digs wrote:hey all

and noooo whats this peeling on my roof? clear coat coming off? ahh help! and its not the rain or anything, it was there when it wasnt raining before
Image


What you can do is do a wet sand to get just the clear coat off if you wanna DIY..With wet sanding make sure you re wet the sand paper atleast every 5 secs..and maybe use 1000 to 1200 grit..something nice and fine, then just get some clear coat in a can and should be alright
User avatar
By Digs
#167333 so guys i got everything back from the engineers, all i need is an oil pump and some bearings for the crank and conrods and then with the help from my dad we'll start building the engine! hooray! hopefully be running mid Feb! but while i wait for those parts im spending alot of time and sandpaper on the tappet cover, omg... but hey preparation is vital for the paint!
User avatar
By Digs
#168392 Hey guys finished my tappet cover! Here she is

before:
Image

after:
Image
User avatar
By josephsantos
#168393 Nice VC paintjob.
User avatar
By Digs
#171459 hey guys been a lil busy with work and varsity so havent had time to start on the engine but will soon!!! Going 15" yes this is an edited post, i did say 17" but i did the correct calculations and came to my sense to go 15"
User avatar
By Digs
#180080 New wheels!!! :)
Image
User avatar
By goblin
#180347
Digs wrote:New wheels!!! :)
Image


i like those.. are those 15'?