Civic-EG.com Forum 3.3.1

- Wed Aug 20, 2008 1:19 am #66759 how dose one tell if you have a set.

EJ1 Owner!

- Wed Aug 20, 2008 10:35 pm #66841 usually aftermarket cams have some sort of distinction. For example...HKS = Purply colour,
Skunk2=Laser engraved retard points with S2 written on it somewhere

and so on...

not to sure about ebay types, you could always post up a detailed pic and someone should know

- Wed Aug 20, 2008 11:49 pm #66862

how dose one tell if you have a set.

There are two of them. That makes a set.


Different companies will mark them in different ways. Toda stamps theres with what ever spec they are. A B or C.

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

- Thu Aug 21, 2008 1:08 am #66867

how dose one tell if you have a set.

There are two of them. That makes a set.

- Thu Aug 21, 2008 4:27 pm #66956 rofl at set comment

i was looking at some and there is a "J" in a circle engraved on the cam shaft it self not the lobs and on both shafts its located right in the middle of cylinder 2 and 3

EJ1 Owner!

- Thu Aug 21, 2008 11:31 pm #67001 my only guess for that would be JUN cams, but I have no idea. I cant think of another cam maker that uses J...

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

- Fri Aug 22, 2008 1:38 am #67018 I'm such an idiot, I could of swore you said cam gears in my mind lol
There's hardly any way of telling what cams are what, that's why many people have issues with "type-r" lookalike cams. As far as I know you would have to measure the cam lobes and cam angle and compare to manufacture specs. JDMChick might know about the skunk2 cams as she's recently got a set. she might be able to confirm if they have an form of engraving on them

- Fri Aug 22, 2008 4:56 am #67030

my only guess for that would be JUN cams, but I have no idea. I cant think of another cam maker that uses J...

yeah thats what i thought and the car dosnt have a "mean" idle so they are not all that aggresive.. but the car is running w/o a tune...

EJ1 Owner!

- Fri Aug 22, 2008 4:33 pm #67052 maybe you have the state ones or something.

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

- Fri Aug 22, 2008 9:02 pm #67067

maybe you have the state ones or something.

state ones? im confused. hahah

EJ1 Owner!

- Sat Aug 23, 2008 1:36 am #67084 pay no attention to my lack of spelling. I meant stage ones.

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

- Sat Aug 23, 2008 2:21 am #67087

pay no attention to my lack of spelling. I meant stage ones.

yeah the motor is pulling 2.5 - 3 cars on stock IHE GSR's in 4dr egs and tegs with me actually trying.. lol

EJ1 Owner!

- Sat Aug 23, 2008 3:18 am #67090 well heres a close up of the cam.. and in the pic on the right you can see a N abd on the opposite side of that cam, there is a J

btw srry if its big.



obviously the vtec lobe is bigger...

EJ1 Owner!

- Mon Aug 25, 2008 2:29 am #67230 What motor do you have?

I believe the ones you have are stock. I just ran out and dug a set of gsr cams out of a box, one had a G and the other had an H. I can't remember what the opposite stamps were tho. let me know what motor and i'll go find a set and let you know.

D16z6. Golden Eagle. AFI Turbo. Precision Turbo. Hondata. CG racing.
618hp, 407tq SOHC 10.68@137
My 92 hatch SOHC build. Quest for +600hp. Check it!

- Mon Aug 25, 2008 2:51 am #67236

What motor do you have?

I believe the ones you have are stock. I just ran out and dug a set of gsr cams out of a box, one had a G and the other had an H. I can't remember what the opposite stamps were tho. let me know what motor and i'll go find a set and let you know.

well the motor is a b16a

and imo they arnt stock b16 cams, cause i was looking at a friends set they only have a B on them

EJ1 Owner!