brake lines?
Posted: Tue Apr 29, 2008 8:00 amwat brake lines can i use for my swap? the ctr lines dont fit and the dx lines dont fit either any ideas guys?
First....
wich car/brakes do you have ?
Page 1 of 1
Posted: Tue Apr 29, 2008 8:00 amPosted: Tue Apr 29, 2008 8:01 amPosted: Wed Apr 30, 2008 8:55 amsorry i hav a eg shell and putting an a b16b and cant match up any brake hose for front calipers?
Posted: Wed Apr 30, 2008 1:28 pmFrom what car do the calipers come?
I own a 95 coupe wich originally has 240mm discs and tiny calipers.
I got Goodridge braided brake lines for that... just the normal ones, no special brake lines.
Those lines fitted perfectly on my three calipers;
- stock 240mm (Civic LSI),
- upgraded to 260mm (Civic VTI),
- and now the 280mm (DC2 ITR).
So I don't get what's the problem.
Those brake lines will even fit NSX calipers, Accord Type-R (dual piston) calipers, let's just say; all Honda calipers I know off.
EDIT:
By the way, wrong forum.
IMO this should go in the 'Suspension' part of the forum
I own a 95 coupe wich originally has 240mm discs and tiny calipers.
I got Goodridge braided brake lines for that... just the normal ones, no special brake lines.
Those lines fitted perfectly on my three calipers;
- stock 240mm (Civic LSI),
- upgraded to 260mm (Civic VTI),
- and now the 280mm (DC2 ITR).
So I don't get what's the problem.
Those brake lines will even fit NSX calipers, Accord Type-R (dual piston) calipers, let's just say; all Honda calipers I know off.
EDIT:
By the way, wrong forum.
IMO this should go in the 'Suspension' part of the forum
Posted: Wed Apr 30, 2008 3:47 pmthe calipers are off a ctr! the ctr lines dont match up they too long?
Posted: Thu May 01, 2008 3:29 pmIf they are too long, then they are not connected the right way...