Page 1 of 1
ZC good or bad
Posted:
Sat Jul 25, 2009 9:04 pmby 95civiceg
i was wondering are single cam zc any good
Posted:
Sat Jul 25, 2009 10:41 pmby JUICE
The VTEC SOHC ZC is identical to the D16Z6
D16Z6
* Found in
o 1992-1995 Honda Civic Si
o 1992-1995 Honda Civic EX, EX-V
o 1992-1995 Honda Civic ESi (European Market)
o 1993-1995 Honda Del Sol Si (US)
o 1993-1995 Honda Del Sol ESi (European)
+ Displacement : 1,590 cc (97 cu in)
+ Bore and Stroke : 75 mm × 90 mm (3.0 in × 3.5 in)
+ Rod Length : 137MM
+ Rod/Stroke : 1.52
+ Compression : 9.2:1
+ Power : 125 hp (93.2 kW, 127 ps) @ 6600 rpm
+ Torque : 106 ft·lb (14.7 kg/m, 144 Nm) @ 5200 rpm
+ Redline : 7200 rpm
+ Fuel Cut : 7411 rpm
+ VTEC Switchover : 4800 rpm[3]
+ Fuel Control : OBD-1 MPFI
+ Head Code : P08
+ ECU Code : P28
Posted:
Sun Jul 26, 2009 6:05 pmby Greasedmonkey
it is a good motor. One of the better Sohc motors.
Posted:
Wed Aug 05, 2009 10:28 amby bucopandan
i'll vouch for that engine any time of the day
Posted:
Wed Aug 05, 2009 5:19 pmby suspendedHatch
Cam overlap is slightly better than the Z6.
They also don't have an VTEC oil pressure switch or mounting and vacuum port for the purge solenoid.
But this is true of all JDM motors.
Posted:
Wed Aug 05, 2009 6:20 pmby Greasedmonkey
Yep. My d15b came like that.
Posted:
Sun Aug 23, 2009 3:52 amby bucopandan
though identical in hp output, the d16zc vtec has greater torque than the d15b vtec.
Posted:
Sun Aug 23, 2009 9:15 pmby Greasedmonkey
1.5 vs. 1.6...