Civic-EG.com Forum 3.3.1

- Sun Feb 08, 2009 4:28 pm #94947 would the injectors of an b18a fit a d15b

- Sun Feb 08, 2009 5:46 pm #94982 Yes, but there wouldn't be an advantage. They are the same, 240cc, so unless you are just replacing yours, you wouldn't have any type of gain.

--------------------------------------------------------------------------------

Honda B/D/H/F/K Series Stock Injectors

1992-2000 Civic B/D Series Saturated 240cc
-Except D16y7 Saturated 190cc
1992-1996 Prelude Non-Vtec Peak & Hold 240cc
1992-1996 Prelude Vtec Peak & Hold 345cc
1997+ Prelude Vtec Saturated 280cc
1998-???? Accord (F23a) 240cc
2001+ K20a2 310cc
2001+ K20a3 270cc
2001+ K24 270cc

D16z6. Golden Eagle. AFI Turbo. Precision Turbo. Hondata. CG racing.
618hp, 407tq SOHC 10.68@137
My 92 hatch SOHC build. Quest for +600hp. Check it!

- Sun Feb 08, 2009 6:09 pm #94985 I just wanted to replace them. My buddy has an integra sitting around

[suspendedHatch]

- Tue Feb 10, 2009 8:15 pm #95533

would the injectors of an b18a fit a d15b

It HAS to be an OBD1 B18A. In other words, 1992 or 1993. The 90-91 injectors are peak and hold requiring a resistor box so you don't fry your ECU. All Honda / Acura 92+ are saturated.

The SOHC D series non VTEC and VTEC-E engines use 190CC while the SOHC D series VTEC and all B series use 240CC injectors. You will lose power by switching 190CC to 240CC if it causes you to run richer.

- Thu Feb 12, 2009 2:57 am #95874 So its a bad idea to put in the injectors.I don't want my car to run like shit.