Page 1 of 1
DSM injectors for a D16z6
Posted:
Thu Jan 15, 2009 11:41 amby sixsixsixers
first off what injectors should i get for a d16z6 thats semi- built (rods, pistons, cams, valve springs ect.) and i am going to boost, I have a friend thats telling me to go 550'S and run a little rich or sould I run 450's? Im building a daily driven car, but i want to have a little more power then the average daily driven car? second off, sould I get injectors from a dsm in a junk yard (if so,what should i get them off of) or should i just buy the injectors brand new?
thanx
Posted:
Thu Jan 15, 2009 11:19 pmby flyinryan122
How much Hp are you looing to get?
Posted:
Fri Jan 16, 2009 1:40 amby sixsixsixers
220ish? somewhere around there hopefully
Posted:
Fri Jan 16, 2009 1:44 amby flyinryan122
450's would cover 220hp. You can get them from a turbo eclipse ot talon.
But with rods and pistons and stuff you should easily be able to go a lot higher than 220hp
Posted:
Fri Jan 16, 2009 5:35 amby sixsixsixers
should i get the injectors from a junkyard or just buy them new?
just courious, about how much hp do you think my car would be capable of with rods and pistons?
Posted:
Fri Jan 16, 2009 2:27 pmby teal_dx
either, depending on your budget. keep in mind if you buy DSM's, you'll need a resistor box too. (another ~$10)
Posted:
Fri Jan 16, 2009 4:56 pmby colpitts
whats the best/easiest place to find a resistor box.. i know some preludes had them, can you just go to a parts store and say "i need an injector resistor box from such and such a prelude" and they hook you up from ~10$?
Posted:
Fri Jan 16, 2009 5:21 pmby teal_dx
any honda one will work. EF civics, crx's had them too. Also accords.
Ebay is easy to find them on.
Posted:
Fri Jan 16, 2009 5:26 pmby teal_dx