what else do i need

Turbo and Supercharger discussion
 Reply
User avatar

what else do i need

By Josiah
- Tue Nov 18, 2008 4:54 pm #79267 Gsr motor and tranny, stock head. I was wondering what else I need to have the car at 10lbs and be reliable.
its all stripped apart. i took the block to get hot tanked an honed.
i bought eagle rods and wiseco pistons
king race bearings
brand new type r oil pump and rear main and belt tensioner
i left the head alone
new gasket kit
skunk2 intake mani with hondata gasket stock TB
new tps and map sensor
p28 with crome in it ready to plug in.
almost brand new act clutch.
Ngk plugs and wires,
Msd 6al2 with extra coil and external ready dizzy cap
New shift bushings, cat delete, t3/t4 turbo, waste gate intercooler, charge pipe, bov, couplings, oil feed and drain
Moroso oil pan tapped for turbo drain.
Big tach, boost, oil pressure gauge.
and mugen valve cover that is tapped for oil vaper catch can with filter that i got with it.
walboro fuel pump

I still need to get wideband 02, turbo manifold, and downpipe and litle hoses, dsm 450cc injectors

What else do I need to keep it reliable and fast. On 10lbs or more maybe 12, my daily driver, gsr motor. I have alot stockd up waiting to assemble but i dont want to get everything together and miss something. Any help is appreciated
User avatar

By Josiah
- Tue Nov 18, 2008 6:50 pm #79281 teal i thought you had a cpu at work?
User avatar

By teal_dx
- Tue Nov 18, 2008 8:45 pm #79297 lol, not on here all day though. There's people on here with more experience in turbo's than I have anyways....

what about a adj fuel pressure regulator?
pyrometer isn't a bad investment either, monitors your exhaust gas temps.

Definitely need a resistor box for the DAM 450cc's

ARP head studs for sure too.

while replacing the oil pump & tensioner is a good time to replace the water pump.
User avatar

By Josiah
- Tue Nov 18, 2008 9:14 pm #79302 i forgot to add i have new water pump and arp head studs.
but the resistor box, isnt that for high impendence injectors? i thought the dsm 's were low impendence, is there any injector i can go with without doing the box?
User avatar

By Sentry
- Tue Nov 18, 2008 10:46 pm #79326 I got a set of RC 370cc injectors for $200 CAD. :3
User avatar

By Josiah
- Wed Nov 19, 2008 2:26 pm #79445 cool thankx that helps, i need 450cc or 600cc
 Reply
Return to Boost