coments, support and suggestions on doing boost on sedan

Posted:
Mon May 17, 2010 3:32 am
by Jorje914
Ok guys, well i got a 95 sedan that im traing to do boost on it. the car is a daily driver, it has a d15b7 and it has 180xxx on it ,,,yea i know a lot, but this is what im thinking of putting a d16y8 head before doing the swap... on the turbo side now, well im willing to spend 1k doing this but i want to doit the right way since is going to be my dd ... suggestions and coments would begrest on what type of pistons bearings exhaust everything to be reunning good good, i would apretiate all the support that any body out there can give me on what to start with this project on mind ....thank you

Posted:
Mon May 17, 2010 4:30 am
by TrailerTrash
if your going with a stock engine and are hoping to have a decent turbo setup with supporting mods for $1,000 you have your hopes up too far

Posted:
Mon May 17, 2010 4:46 am
by teal_dx
I'd save up more if you want the setup to be reliable and long lasting.
$2000 will get you a good setup & tuning unless you want to try an ebay kit.

Posted:
Tue May 18, 2010 3:16 am
by Jorje914
ok that sounds good i can start saving from now n yea then willing to spend 2 stacks .... i apretiate with the responds so far

but would like more detail on it

thaks guys

Posted:
Tue May 18, 2010 3:32 am
by Butterzz
Start by understanding all of the parts you need first, and knowing what they do:
http://www.turbobygarrett.com/turbobyga ... ch101.html
I have an ebay setup that runs 8psi that works fantastic on my '92 EH9. I have about $1200 into it.

Posted:
Wed May 19, 2010 3:41 am
by Jorje914
nice website, i knew already how the turbo works but the detail is fantastic on that web site... like i said im willing to spend enough for a good turbo set. ...... all this information is very helpful for me, just keep it coming, and shoot me the one


Posted:
Thu May 27, 2010 1:21 pm
by forcefedEG
http://www.treadstoneperformance.com/pr ... +Turbo+Kit
there stuff is good.... theyd deff be worth taking a look at... i pieced my kit from scratch, but i got alot of my pieces here...

i will see if i can find some of the other links i used and will post em...

Posted:
Wed Jun 02, 2010 3:17 am
by Jorje914