Civic-EG.com Forum 3.3.1

- Thu Jul 28, 2011 4:08 am #265299 you need wheel screws which would do the same thing as a beadlock to stop that tire slip

- Thu Jul 28, 2011 4:21 am #265302 Yeah I know. I'd just rather not drill and use screws on a cast wheel. Kinda sketchy

D16z6. Golden Eagle. AFI Turbo. Precision Turbo. Hondata. CG racing.
618hp, 407tq SOHC 10.68@137

- Mon Aug 15, 2011 5:07 am #267590 Got another trans. Swapped the gear stacks to mine, and took her out on pump gas again last week.



2nd place again haha. Got a bit anxious, went -.015 red. But i was dialed 11.84 and she was dialed 16.18. So i had quite the wait. So since i went red, i just ran it out. Went 11.74@118. But god damnit, she broke out. So all i needed was a green light, and get on the brakes when i caught her. oh well.


Then this weekend ....




Won last night. Guess third times a charm haha. Car is getting quicker. The change up in suspension is really starting to show on the time slips. It went from consistent 1.80-82 60fts, to 1.70-72. And brought the 330's down in to the 4.8-9 ish range. I'll take some pics of the slips to show the improvements.

D16z6. Golden Eagle. AFI Turbo. Precision Turbo. Hondata. CG racing.
618hp, 407tq SOHC 10.68@137

- Mon Aug 15, 2011 4:49 pm #267613

- Sun Aug 21, 2011 5:19 pm #268381

D16z6. Golden Eagle. AFI Turbo. Precision Turbo. Hondata. CG racing.
618hp, 407tq SOHC 10.68@137

- Tue Aug 23, 2011 2:03 am #268537 http://www.fedex.com/Tracking?tracknumb ... e=ivother&

D16z6. Golden Eagle. AFI Turbo. Precision Turbo. Hondata. CG racing.
618hp, 407tq SOHC 10.68@137

- Tue Aug 23, 2011 1:18 pm #268565

- Tue Aug 23, 2011 4:30 pm #268590

Carlos
1AAUTO.com
888-844-3393
FREE SHIPPING IN THE LOWER 48 STATES

- Fri Aug 26, 2011 1:18 am #269031 Thanks guys.

D16z6. Golden Eagle. AFI Turbo. Precision Turbo. Hondata. CG racing.
618hp, 407tq SOHC 10.68@137

- Fri Aug 26, 2011 1:58 am #269039

- Fri Aug 26, 2011 2:20 am #269045

D16z6. Golden Eagle. AFI Turbo. Precision Turbo. Hondata. CG racing.
618hp, 407tq SOHC 10.68@137

- Fri Aug 26, 2011 2:26 am #269046

- Sun Aug 28, 2011 3:30 pm #269341

90%done


to see my build go here >>>

- Sun Sep 04, 2011 3:04 pm #270342 So, here are some update pics.








I'm not done yet. But I should be done by Tuesday. Went to the track friday night. Car picked up a LOT from chassis stiffening. In the heat of the day around 5:30 pm, car would be around 11.95-12.0's. First pass of the day went 11.70@120. Second pass went 11.68, third pass went 11.64 for a new PB on pump gas (390hp). fourth pass i had some issues. Oil pressure sensor walked out of the back of the block all 5 quarts of oil all over the firewall and track Luckily, nothing was hurt. Damn solid mounts.

D16z6. Golden Eagle. AFI Turbo. Precision Turbo. Hondata. CG racing.
618hp, 407tq SOHC 10.68@137

- Sun Sep 04, 2011 8:06 pm #270367 Coming out good. Sorry about the oil pressure sensor.