Page 1 of 1

Door Lock

PostPosted: Thu Jan 31, 2013 1:59 am
by nd1983
So for some reason my Drivers door lock when locked, drops lower then the other 3. no idea why, anyone else have this issue.

i have yet taken the door apart as i have no idea where to lpok for an issue

PostPosted: Fri Feb 08, 2013 5:37 am
by MG6
are you saying it doesn't lock?

is it manual or power?

PostPosted: Sat Feb 09, 2013 3:25 am
by nd1983
MG6 wrote:are you saying it doesn't lock?

is it manual or power?

it locks, and manual.

you know how when the door is locked, the top is supposed to be flush with the trim its not it sits about 1/4" lower. aswell you have to open the door handle or have the door open to lock the door you can't just push it.

PostPosted: Sat Feb 09, 2013 3:45 am
by MG6
:o . Wait, the door lock is next to the pull handle on all eg. What year is your car?

but if yours door lock is like the old accord where the lock is on the top panel next to the window glass... Then you can adjust them if you open up the panel to the door.

PostPosted: Mon Feb 11, 2013 10:32 pm
by nd1983
MG6 wrote::o . Wait, the door lock is next to the pull handle on all eg. What year is your car?

but if yours door lock is like the old accord where the lock is on the top panel next to the window glass... Then you can adjust them if you open up the panel to the door.

my lock is located at the rear of the panel and at the top near the glass.

so you say i can remove the panel and then just spin it like a nut? to increase the height

it looks like this but without all the power features.
Image

PostPosted: Tue Feb 12, 2013 6:32 am
by MG6
:? Is that an si?

not familiar with this door panel. Sorry and hope others will reply.

PostPosted: Tue Feb 12, 2013 9:34 am
by josh93coupe
Yeah you can usually adjust them by turning them, when its a round lock... But ive never messed with this style.. Has to be some way to adjust it you would think