Civic EG

should i be trying harder to bolt them in as is cuz it's not working out or do i have to swap the rails? this has probably been done a million times but i can't seem to get it right

depends on what the seats are out of and what civic you have....

integra seats that you can use and how you can use them....

94-953dr-should bolt right in a 2/3dr civic the 4dr has a shorter seat rail so these will need to have the rails switched unsure about the 4dr integras im thinking they would work........
I beleive the 96+ have a different style seat rail so they will need to be switched accordingly

the 90-93 wont work as far as ive read.....

90-93 wont have all 4 holes line up.

a friend of mine swapped in his 98 integra coupe seats right into EG hatch, So the 96-01 Should be the same as well.

so i read around and i saw a diy for a seat rail swap so i did that.. it didn't work out too well cuz the civic rails weren't wide enough i guess cuz one rail was moving freely and the other wasn't. so i put the integra rails back and wiggled it round so all the bolts lined up and tada .. thanx for all the help

Classiccarsrule85 wrote:depends on what the seats are out of and what civic you have....

integra seats that you can use and how you can use them....

94-953dr-should bolt right in a 2/3dr civic the 4dr has a shorter seat rail so these will need to have the rails switched unsure about the 4dr integras im thinking they would work........
I beleive the 96+ have a different style seat rail so they will need to be switched accordingly

the 90-93 wont work as far as ive read.....

what do you mean the 4dr has shorter rails?

all my 2/3 seats fit my 4dr perfectly

as do my integra seats that i got from a DC coupe fit perfectly in place in my 4door no rail swapping once so ever...