Page 1 of 1

aftermarket hood and fenders

PostPosted: Wed Aug 25, 2010 3:37 am
by ubbeR
so got hit by a motorcycle (YES I GOT HIT) and i had to get new bumper, hood, and fenders. all of them are aftermarket. i was wondering if anybody had any tips to line up the hood and fenders ill post pictures to show you the gaps.

ok so close your eyes and squint and it looks good
Image

now get a bit closer on the drivers side. it rubs...
Image

hood hangs over the driver side headlight
Image

WORST PART this is the passenger side
Image

another pic of the passenger side
Image

and another
Image



any suggestions or any input would be awesome


ALSO IF I POSTED THIS IN THE WRONG PLACE IM SORRY.

FEEL FREE TO FLAME AWAY <3

PostPosted: Wed Aug 25, 2010 3:55 am
by 92civic_vx
try to re-adjust the hood, loosen the bolts and shift the hood towards the pass side a little and tighten em up. close the hood and see if it fits better, may take a few times to get it close. i had this problem when i removed my hood and put it back on later. can be hard to do it without someone to help.