Page 1 of 1

best way to crush the hell out of 95 ex

PostPosted: Mon Jan 12, 2009 6:55 pm
by kingmorgan
im tryin to crush the shit outta my coupe. wahts the best way price wise and ride wise. i hate bouncing.

PostPosted: Mon Jan 12, 2009 7:21 pm
by Classiccarsrule85
im confused around here crushed means destroy it send it to the junk yard type deal and put it out of its misery....

and yea you need to elaborate on what you mean by crush

PostPosted: Mon Jan 12, 2009 7:31 pm
by marvinp8700
i think he means lower/slam :?

PostPosted: Mon Jan 12, 2009 7:45 pm
by kingmorgan
haha. the best way to drop the body of my civic. not crush the body at a junkyard

PostPosted: Mon Jan 12, 2009 8:54 pm
by Classiccarsrule85
well if you want to drop it and crush cans lol then id do airbags its really all about how you want to drop it they all have their goods n bads

-lowering springs are at a fixed height but tend to be easier to work with....

-coilovers definately need to be at the same height on either side or it will be alittle hard to control and well good ones are a tad expensive

-bags are ok for shows cant say i know how comfy they are never been in a car that has been bagged.....but yea they tend to be the the heaviest set up outa the two...

PostPosted: Tue Jan 13, 2009 1:45 pm
by kingmorgan
any recommeded brands? coilovers or springs. i havent found springs thatl go low enough.i want more than 2 inches worth a drop

PostPosted: Tue Jan 20, 2009 3:54 am
by Eddie R
I recommend Tokico. they're not the best and they don't suck but you can get about 1 to 4 inches low on some sets :thumb:

PostPosted: Tue Jan 20, 2009 6:18 am
by 92EXFrostWhiteEG9
i have a pair of skunk2 spring that make my car slammed to the ground not sure of the shocks....ill put the iches drope
http://s21.photobucket.com/albums/b252/ ... k2add2.jpg

PostPosted: Fri Feb 13, 2009 3:52 am
by hawkabeem
i have the tein basic coilovers on mine it's slammed but thay r kind of pricey i paid $800 new

PostPosted: Mon Feb 23, 2009 8:16 am
by perry83
For daily driving i'd go with a good set of lowering springs and call it a day. Probably the cheapest and easiest way to get the ride height you want.

PostPosted: Wed Mar 11, 2009 6:25 pm
by 93civicgsr
couldnt u jus cu the springs? :?

PostPosted: Mon Mar 30, 2009 11:59 pm
by jdm_boy
simple set up is to do tokico blue struts with any kind of coil over sleeves you will get a awesome drop with out any bouncing

this is my coupe in this pic its sitting on coilover sleeves in the front and cut springs in the back
Image

PostPosted: Tue Mar 31, 2009 1:15 am
by ballistic
please don't cut your springs