Civic EG

peel off what you can of the tint then make sure you take any interior pieces out cause I found that spraying a little 87octain on the adhesive and then use a razor blade and it just comes off like there is sticky jello on the window, But when I did it the window was out of the car but it was very easy, I would think if you put the fuel in a mist bottle it would work well but I was suprized how easy it was to get off, if you don't want to use gas I would think Acetone would work very well to. I know it wouldn't smell as bad...

Gasoline is a solvent, and a damn good one at that.

I would try some less harsh/smelly/flammable ones first.

OHH, come on what fun is that?

the best way is ammonia. but it STINKS!!!

use gas and make sure all your doors and windows are closed : o

Dippin_EG wrote:the best way is ammonia. but it STINKS!!!

that's what everyone was telling me but I just went in with some orange glass cleaner and that works really good for me. I still have a little more to go and I'll be done with my windows..then it will be time to finish greasedmonkey's hatch

i used some 3m adhesive remover for mine. i just puled off what i could then soked my window with the spray and just used a razor to scrape the glue off. dosent leave a harsh smell after. i have 2 more windows and then i can have them re tinted.

I used a power steamer to get mine off, no razor blades and no chemicals. Came off easy...and was baked on from 14 years in north Texas sun.

Goo-gone FTW!! http://www.magicamerican.com/googone.aspx Ive used it MANY times to take off horrible faded tint. Works every time. Plus its cheap!

I think you can heat it up and it peels off.
Like with a heat gun.
Not sure but I think I've heard of it before.
I know it works with some other adhesives.