Page 1 of 2
single stage pearl help

Posted:
Fri Dec 28, 2012 8:36 am
by thomasEg
im paintin my 1992 civic dx hatch firethorne red pearl ive already purchase all of the paint and/primer/gun tape sand paper ive preped the car from sanding and bondo small dent leveled and aim painting it this weeked and am looking for tips on how to paint ss pearl and not screw it up i already know not to wet sand inbetween coats and not to buff but found this out after purchasing it just any info on how to not screw it up and aim not returning


Posted:
Fri Dec 28, 2012 2:16 pm
by teal_dx

Posted:
Sat Dec 29, 2012 5:57 am
by thomasEg
thanks for the links but i know what pearl does i jus wanna know the best way to paint it and it not come out all dull


Posted:
Sun Dec 30, 2012 3:26 am
by nd1983
2 stage. mix the pearl with the base colour and apply. then clear. if you really want to tri stage it you can but easier to screw up that way.

Posted:
Sun Dec 30, 2012 6:22 am
by thomasEg
its a single stage paint kit but thanks for the help

Posted:
Sun Dec 30, 2012 6:31 am
by HaydenSI
Just paint it nice and slow. You want to try and layer the paint on to give it the gloss color. I have only done pearl 2 times but the way i did it was to pretty much cut the car in half. Hood to the start of the bumper.. then bumper to start of hood. Paint in one big long stretch a light coat. Repeat until the paint has the desired effect and gloss. As for wet sanding. I would use an EXTREMELY high grit wet paper at the end.
Anyways I hoped this helped some.
EDIT: Oh and be sure to keep your hand at an even length from the car at al times. Get too close and the paint will be thicker in that area visa versa. Which with perl could orange peel effect.

Posted:
Wed Jan 02, 2013 4:52 am
by thomasEg
painted it today didn't come out to bad some orange peel but that's what I already expected good color I'll buff it in a month or two after its cured fully

Posted:
Wed Jan 02, 2013 2:08 pm
by teal_dx
Pics!!


Posted:
Thu Jan 03, 2013 2:28 am
by thomasEg
ok does any have tips on how to buff it good its a single stage pearl red in knowing that i want to do it by hand and bring a little more depth to it more gloss

Posted:
Thu Jan 03, 2013 2:54 am
by HaydenSI
thomasEg wrote:ok does any have tips on how to buff it good its a single stage pearl red in knowing that i want to do it by hand and bring a little more depth to it more gloss
Did you wet sand it yet?

Posted:
Thu Jan 03, 2013 10:20 pm
by thomasEg
no cause ive been told not to and im waiting a little while for it to cure fully

Posted:
Fri Jan 04, 2013 9:42 pm
by thomasEg
how do you post pics i took some

Posted:
Sat Jan 05, 2013 1:14 am
by thomasEg

Posted:
Sat Jan 05, 2013 1:17 am
by thomasEg

Posted:
Sat Jan 05, 2013 4:10 am
by HaydenSI
May i ask what type of paint you used?
It should be full and well to wet sand if you use a high enough grit, applied a thick enough coat, and be gentle.