Page 1 of 1
Wheel Spacer
Posted:
Sun Mar 13, 2011 9:20 pmby markie88
I have a set of 6UL wheels 15x7.5 "205/50" I'm thinking of getting a wheel spacer. As the wheel is almost hitting my camber arm. (I'll be taking pics later after work or when im free). What size should I run or is 10mm to big? and what brand?
Posted:
Sun Mar 13, 2011 9:41 pmby teal_dx
You'll need to measure your inner & outer clearance to determine the width of spacer. H&R make a good spacer, but whatever brand you go with, a hubcentric type is the best.
Posted:
Sun Mar 13, 2011 11:37 pmby 92hatchie
um arent wheel spacers dangerous? ive heard that over time they snap n boom wheels is off!!
Posted:
Mon Mar 14, 2011 1:00 amby teal_dx
hubcentric wheel spacers keep the load of the wheel on the hub where it was designed to be instead of on the studs. The studs are meant to keep the wheel on the hub.
Posted:
Mon Mar 14, 2011 2:09 amby markie88
I checked H&R website was looking at it my wheel has 67.1 center bore and H&R has 56.1 I don't think I can use H&R?
btw my wheel has 42offest
Posted:
Mon Mar 14, 2011 4:44 amby teal_dx
15x7.5 +42mm offset should be alright. Can you post some pics?