Page 1 of 2
quick ?
Posted:
Thu Aug 13, 2009 8:52 amby FREDDY1
hey all i found some wheels for a good price.
enkei apacheV's 14x6 +18 can i use this wheels on my eg with out any problems??
Posted:
Thu Aug 13, 2009 12:10 pmby Chance
What eg do you have... ex/cx/dx/si/lx etc... and Are the wheels 4x100? or 4x114.3? most of them ive seen are 4x114.3..
Posted:
Thu Aug 13, 2009 12:37 pmby Punksz6
Man those are Sick!!
Me like me like!!
If those are 4x100 get em!!!!!!!
Re: quick ?
Posted:
Thu Aug 13, 2009 12:38 pmby teal_dx
FREDDY1 wrote:hey all i found some wheels for a good price.
enkei apacheV's 14x6 +18 can i use this wheels on my eg with out any problems??
depends on ride height, tire size, camber, spring rate...
You should be okay unless any of the above are too extreme. Worst case you may have to roll the inner fender lip.
Posted:
Thu Aug 13, 2009 12:44 pmby Punksz6
I almost got some that were the same style this past weekend for a Flippin good deal but they were 4x114....Also Teal is right thats a very low offset...But if u can pull it off then SICKNESS!!
(Here are the ones I was gonna get)
Posted:
Thu Aug 13, 2009 1:25 pmby Chance
I really dont think there will be any issues unless its the wrong lug pattern. Plus they are sick wheels.
Posted:
Thu Aug 13, 2009 3:51 pmby FREDDY1
alright thanks i got a dx
Posted:
Thu Aug 13, 2009 4:05 pmby Greasedmonkey
those are 4x114.3 pattern. 4x100 has the holes closer together.
the wheel would also stick out 27mm more than a 15x6 +45 wheel would. I really need to find out the stock specs on our steelies...
Posted:
Thu Aug 13, 2009 5:37 pmby FREDDY1
yeah my bolt pattern rightnow is 4x100
i was going to get a adapter for them going from 4x100 to 4x114.3
that would work right?
im only doing this cuz im getting the wheels for a good price.
Posted:
Thu Aug 13, 2009 5:41 pmby Chance
Get'em then! throw them on and if for some reason you cant get them to work (which I think you'll be ok) then you can re-sell them and make a profit
Posted:
Thu Aug 13, 2009 5:46 pmby FREDDY1
yeah same thing i was thinking hahaha
thanks for the help
one more thing were can i get some good adapters online?
Posted:
Fri Aug 14, 2009 3:07 amby FREDDY1
just got back from a 45min drive to get my wheels
got them for $120
Posted:
Fri Aug 14, 2009 3:27 amby teal_dx
some of those adapters are kinda thick which will be adding more negative offset to the wheel. You didn't mention adapters before... you may have a fitment problem with these on your car + adapters...
nice buy though
Posted:
Fri Aug 14, 2009 4:07 amby FREDDY1
haha yeah did up ^ there
mm i seen it done b4 but u might b right =/
only one way to find out or mayb i can trade them...?
how much can i sale them for..? there in pretty good condition =]
Posted:
Fri Aug 14, 2009 6:51 amby Punksz6
SICK!!
