Civic EG

I tried reading all over the Brakes section but i couldn't seem to find the answer to my question, and I don't want to jack somebody else's thread.

So my question is, does the 90-93 Integra have bigger front rotors/calipers than ours? If so, would it just be a straight swap? i.e. Just rotors and calipers. I just want to know what other parts I would need and if someone has done this I'd like to hear some feedbacks/tips/etc.

Thanks!
JM

3rd gen integra suspension parts bolt up to our 5th gen civic chassis.
2nd gen integra suspension parts bolt up to 4th gen civic chassis.

Thanks for the input.. Now I just need to test my luck at the pick-and-pull, since there's not a lot of 3rd gens there..

you can fit the rear disc brakes from the 90-93 on to our cars

on the front might be able to get away with just getting the spindle with no a-arms. but dont quote me on that.

I'll keep that in mind, thanks Rob. But I'll look for a 3rd gen just to make it easy. I just wanted to have bigger rotors and calipers anyway.