Page 1 of 1

handbrake (e-brake)

PostPosted: Thu May 24, 2012 2:29 pm
by baconsauce
how do you adjustment the emergency brake on the car?
or if it gone bad does it need any part replacement?

thank you and I am not much experience with brakes myself.

PostPosted: Thu May 24, 2012 2:52 pm
by elrompetoto
Take off ur center counsel the one by the e brake handle u will c 2 10 mm nuts or 12 mm not shore put ur ebrake down tighten those up and pull ur ebrake up u will feel it get hard at a lower level

PostPosted: Thu May 24, 2012 3:43 pm
by Stank.EG6.Stay.Nasty
:thumb:

PostPosted: Fri May 25, 2012 3:19 am
by baconsauce
matched up a theory in my brain

:thumb: :thumb: :thumb:

PostPosted: Fri May 25, 2012 3:24 pm
by baconsauce
I could not find those bolt when I took off the center console

do you mean that bolt at close to end of the handbrake?

PostPosted: Fri May 25, 2012 3:44 pm
by elrompetoto
Yeah the one right after the e brake handle

PostPosted: Fri May 25, 2012 4:20 pm
by baconsauce
I just looked at it and right behind the hand brake and all i see is the thing hold wire with no bolts, just little dome and right behind it has bolt that are straight line along the handbrake

PostPosted: Fri May 25, 2012 5:38 pm
by elrompetoto
Send me a pic

PostPosted: Fri May 25, 2012 6:04 pm
by baconsauce
Image

there the bolts next to my thumb

PostPosted: Fri May 25, 2012 6:05 pm
by elrompetoto
U c the One that holds the 2 brake cable that's the one u need 2 tighten

PostPosted: Fri May 25, 2012 6:07 pm
by elrompetoto
U c the spring that is holding the 2 lines all the way at the begging of the line there a but right there just tighten with the ebrake handle down

PostPosted: Fri May 25, 2012 6:11 pm
by baconsauce
its worked, firmly and much better
thanks brah :thumb:

PostPosted: Fri May 25, 2012 6:12 pm
by elrompetoto
No problem make sure it's not 2 tight and stays on with the handle down

PostPosted: Tue Jun 05, 2012 1:42 pm
by zer0
:thumb: