Civic EG

Sorry about this but its another thread about disc brake conversion. So recently i installed front and rear GSR disc brakes on my eg and currently it has stock 30/30 prop along with stock bb/mc, when i drive around it brakes half way then when im at a full stop the pedals sinks to the floor.

As we speak im starting to swap the 4040 prop valve and im just wondering if its necessary to swap the bb/mc also, because ive read how its not necessary to swap a dc2 bb/mc is this true? and im also wonderinf if i just swapped the dc2 mc and use it on stock bb?

okay nvm .. just for people who has the same problem or who also are asking the same questions as me I can tell you that after installing my 4040 prop valve, the problem i had earlier had gone away! it is NOT necessary to install a dc2 BB/MC. If you want to spend more money i guess you can switch it too but there would only be a slight or no difference at all because the stock eg MC contains enough fluid to distribute throughout all disc because of the 4040 prop.