kill switch
Posted:
Tue Apr 14, 2009 5:53 pmby platnuim86
how do you make a DIY kill switch
Posted:
Wed Apr 15, 2009 6:08 amby chrono404
Basically you put a switch in an import circuit to "kill" it. you can use anything you want. a/c Switch, ebrake. Door being open, Radio Shack switch. the more creative you are the more likely your system wont be defeated.
http://causeforalarm.thecarthing.com/ve ... index.html
This site is suspended hatches site, Has tons of really good info. Highly Recommended.
Posted:
Thu May 21, 2009 5:19 amby blind monkey
I always thought it would super stealth if you went into your ECU and cut the power wire inside then hook up the ends of the power wire to 2 unused pins on your ecu. after you do this you would need to get an extra harness and remove a couple of pins with the wire attached and thread this into your harness to be run to your alarm or whatever you were doing for a hidden kill switch. thought it would be cool but not sure of the work involved inside the ECU to do it. im thinking this is a skilled kinda job.