Page 1 of 1
amp remote wire

Posted:
Wed Dec 15, 2010 5:25 am
by 93hatcheg
my amp only turns on when the stereo is on the radio mode it turns off whhen i change to cd ipod or aux!
anmyone else ahad this problem?\
its a higher end sony head unit and mtx sub and amp.

Posted:
Wed Dec 15, 2010 7:16 am
by ZactheRipper
You have the amp remote input on the electric aerial wire.
Theres another wire for amp turn on.

Posted:
Wed Dec 15, 2010 7:19 am
by 93hatcheg
ahh shit ok ill check it out tommrow, thanks man

Posted:
Tue Dec 21, 2010 7:09 am
by edcortez9
if you have an aftermarket stereo you have it connected on the all blue wire which is a remote but for the antenna, you need to connect it to the blue white unless you have an off brand stereo then the wire color vary

Posted:
Tue Dec 21, 2010 7:28 pm
by 93hatcheg
edcortez9 wrote:if you have an aftermarket stereo you have it connected on the all blue wire which is a remote but for the antenna, you need to connect it to the blue white unless you have an off brand stereo then the wire color vary
ok cool that would be my problemo lol


Posted:
Thu Dec 30, 2010 7:49 pm
by ohDirka
or you can wire it with a switch but you'll need a cable with 3 different wires in it. You just have to make sure you turn it off every time you stop for a while. I prefer doing it this way so when I dont want bass I just dont turn it on.