Page 1 of 1

I have a wiring nightmare and need help.

PostPosted: Sat Feb 23, 2013 5:42 pm
by MetruisVtec
Ok so i bought a 92 eg sedan dx about a week ago and on the second day i bought it i realized that when i would press the brakes my corner and side markers would light up. Then the next thing i noticed also was when i pressed the brakes that my license plates light would light up. But thats not all, at night when i have my lights on and i hit my brakes they dont light up. But they work fine when the lights are turned off, oppose to the license plate light lighting up with them. Please help, i dont know where to start and i feel like all of this is probably because of just 2 or 3 wires somewhere. :?

PostPosted: Sat Feb 23, 2013 10:16 pm
by teal_dx
Are all of the lights the OEM ones or aftermarket projectors/altezzas that someone had to wire in?
Have you looked at the wiring to see if any of them have been cut/spliced?

PostPosted: Sun Feb 24, 2013 12:28 am
by MetruisVtec
All lights are OEM. The only wires I found spliced was for a different third brake light that the previous owner wired and I unhooked all of those.

PostPosted: Mon Feb 25, 2013 1:18 am
by MetruisVtec
I finally figured it out. Turns out my sidemarkers were wired wrong and was causing all diets of problems. So their jus disconnected.