Page 1 of 1

my rpm gauge in mycluster stoped reving but still lights up?

PostPosted: Sat Jan 02, 2010 6:41 am
by EJcivic732
my rpm gauge in my cluster stoped reving but still lights up and everything else still works. Has anyone ever had this problem before?

PostPosted: Sat Jan 02, 2010 5:08 pm
by Classiccarsrule85
either the tach went caputs or the tach signal justdosent exist either wires bad or the thing that sends the signal is.....

Here a simple test to do grab a tach from a friend or another cluster with a tach (if you have a tach on its own then wire it up correctly useing the blue wire behind the cluster(I wouldnt cut it i would just seperate the sheilding a bit attatch another wire and hook it up to the tach....)) hook everything up and if you still dont have a signal then take a multimeter to the blue wire on the cluster harness to the blue wire on the dizzy check that and see .....

hope that helps