Page 1 of 1
power locks?
Posted:
Sun Jun 21, 2009 3:48 pmby asianrob
when i got my 4door the power locks did not work.. looked at the fuses. they where good.. changed out the control unit and still nothing.. and i changed out the switch still nothing...
any ideas of where to look next?...
thanks in advanced
Posted:
Sun Jun 21, 2009 5:55 pmby yashep
It's there anyway you could trace the wire from the fuse box all the way to the door? maybe the wires are cut or a ground cable is loose
Posted:
Sun Jun 21, 2009 10:46 pmby asianrob
i could try that lol.... i'mm a see if i can get a diagram and go from there
Posted:
Mon Jun 22, 2009 1:52 amby dawg316
test light my friend. check before and after every switch/ actuator. probably a door lock actuator
Posted:
Mon Jun 22, 2009 4:14 amby asianrob
dawg316 wrote:test light my friend. check before and after every switch/ actuator. probably a door lock actuator
i got two known good working ones switches
Posted:
Mon Jun 22, 2009 4:21 amby eg_turbo_hatch
did you check the relay in the fuse box
Posted:
Mon Jun 22, 2009 4:36 amby asianrob
eg_turbo_hatch wrote:did you check the relay in the fuse box
not yet. i'll take a look at that tomorrow.