Civic EG

So i had my swap done by a couple of backyard mechs into a 94cx and so this is what i ended up with. The fuel line looks pretty short so it runs across the intake so they had to leave the intake off. It looks like there's no slacks for the fuel line so I've been running with no intake/filter. Have anyone run across this problem or know a fix for this? i'll try to get picture of my engine bay up

get a longer fuel line..... you could go to Honda or acura and get one for an integra or a civic si or del sol vtec......or you could do to napa or any car parts store and just ask them for it... or you could use a steel braided line with fittings and what not and go from there

edit: i didnt realize it was for a H22 haha go to Napa and they can make you a steal braided fuel line

Ok here is a picture. Notice that the fuel line run right in the way of where my short ram is supposed to go. Now is there a specific line i have to buy to extend the length or can i just use any fuel line?


and then i found this picture of another h22 civic. Do you guys think i can squeeze my intake in there? or just get a braided fuel line just like the picture below.
http://i60.photobucket.com/albums/h24/J ... swap42.jpg

i used a braided fuel line on my other car and an aem hybrid intake made for h22 swaps if that helps

Longer fuel line....and next time...make sure the "backyard" mechanics dont so anything like that again....

reroute it differently. or as stated get a longer fuel line.

ok then it is decided i need a longer fuel line. now before i go out and buy something stupid or just as long, any suggestion? do i need a fuel rail or just a fuel line?

fuel line

fuel rail isn't in the way it's the fuel line. makes sense to modify the fuel line.